Vulcanization molding method is available: hydraulic vulcanization molding
During the mixing process, try to keep the roller temperature of the rubber mixer not exceeding 35℃. When the temperature is high, measures such as air conditioning to control the ambient temperature should be adopted to reduce the mixing temperature. It is recommended that the mixer use chilled water to circulate, and it is recommended to mix a small amount and multiple batches. To prevent the mixing temperature from being too high.

1. It is forbidden to add nitrogen, phosphorus, sulfur, lead, cadmium, polyvinyl, polyethynyl, etc., because the above substances can poison platinum and fail to achieve the purpose of crosslinking.
2. Some organic silica gel pigments can also cause platinum poisoning and invalidation and cannot be used. Therefore, when selecting TC-ABF1 vulcanizing agent for production, it must be tested and confirmed before the unit is fed.
3. After mixing the colloid with platinum vulcanizing agent, please re-mix it after 24 hours. If you need to extend the storage time, it can be stored in the refrigerator.
4. Different silicone products, different rubber materials, use different proportions.
5. After opening the lid, please close the lid immediately to prevent moisture in the air from entering the platinum vulcanizing agent.
6. After the lid is closed and sealed, it still needs to be stored in the refrigerator.

1. 10KG box
2. TC-ABF5 powder

Stored in refrigerator (-5℃) for 3 months, frozen (-20℃) for 6 months.
If the product is not in use, it is not put into the refrigerator to freeze or refrigerate to cause the product to solidify and fail, our cover is not responsible.
1. Avoid high temperature, direct sunlight, acidic substances, metal oxides, amine substances and flammable materials.
2. This product is a non-dangerous product and is stored and transported at low temperature.
The above information is for reference only, if you have any questions, please contact us.