During the mixing process, try to keep the temperature of the rubber mixer roller not exceeding 35℃
When the temperature is high, measures such as air conditioning to control the ambient temperature should be used to reduce the mixing temperature
It is recommended to use chilled water circulation for the mixer
It is recommended to mix in small quantities and multiple batches to prevent excessive temperature

1.It is forbidden to add nitrogen, phosphorus, sulfur, lead, cadmium, polyvinyl, polyethynyl and other substances, because the above substances can poison platinum and fail to achieve the purpose of crosslinking.
2. Certain organic silica gel pigments can also cause platinum poisoning and invalidation and cannot be used. Therefore, when choosing TC-AB1 vulcanizing agent for production, it must be tested and confirmed before the unit is fed.
3. After mixing the colloid with platinum vulcanizing agent, please re-mix it after 24 hours. If you need to extend the storage time, it can be stored in the refrigerator.
4. Different silicone products, different rubber materials, use different proportions.
5. After opening the lid, please close the lid immediately to prevent moisture in the air from entering the platinum vulcanizing agent.
6. After closing the lid and sealing, it still needs to be stored in the refrigerator.

Product appearance: TC-AB1 gel
Product packaging: 1KG/bag 10KG/carton

Store in refrigerator (5℃) for 3 months, frozen (-20℃) for 6 months
If the product is not in use, it is not put into the refrigerator to freeze or refrigerate to cause solidification and dead glue, our company cover is not responsible.
1. Avoid high temperature, direct sunlight, acidic substances, metal oxides, amine substances and flammable materials.
2. The product is a non-dangerous product and is stored and transported at low temperature.